ALUMINUM FENDER BRACKETS (SPRING AXLE)

ALUMINUM FENDER BRACKETS

• THESE BRACKETS ARE MADE FROM 2” WIDE ALUMINUM FLAT BAR.
• MEASUREMENTS ARE TOTAL LENGTH OF FLAT BAR BEFORE THE ENDS ARE BENT.
• THE LONG BEND IS 3” LONG AND THE SHORT BEND IS 2” LONG
• MEASURE THE FLAT BAR BETWEEN THE BENDS AND ADD 5” TO GET APPROXIMANT LENGTH.
• THESE BRACKETS ARE USED ON TANDEM AND TRIPLE AXLE TRAILERS WITH SPRING AXLES.
• THESE ARE NOT MADE TO USE WITH TORSION AXLES.